Asked what sets Numex Blocks apart from the competition, owner Nitin Patil replies, “We treat every job that comes in as if it’s the first job for that customer. They all deserve the same time and attention.” Numex recently won a Silver Award in the Miraclon-sponsored Global Flexo Innovation Awards for a successful gravure-to-flexo process conversion involving ‘direct-to-tube’ printing of more than 2,500 skincare SKUs.
Patil believes the switch to direct-to-tube printing would have been impossible without the use of Flexcel NX plates both in terms of productivity and quality. “The manufacturer achieved excellent results at a screen ruling of 150-175 lpi and a production speed of 130 tubes a minute.”
Numex invested in a Kodak Flexcel NX system in 2014. Subsequently, Flexcel NX systems have also been installed at its sister companies – Nuflex Graphics in Pune, and NS Digital Flexo in Hyderabad. The fifth system is planned for later this year, a clear vote of confidence in the technology, especially for flexible packaging. “The transition from gravure to flexo is happening across Asia, not just in India,” he says, adding that one factor in favor of flexo is its “ability to deliver high-quality results on thinner, more sustainable PE substrates – an area where gravure has limitations.”
The award-winning entry demonstrated precisely these advantages, as well as Numex’s trademark job-to-job attention to detail. A key objective of the job was to improve the sustainability performance of a substantial number of tube-packaged skincare products – more than 2,500 SKUs in total. “Gravure and other production processes typically involve printing on plastic-based substrates, which are then applied to the tubes. Apart from the additional production step, this adds complexity at the recycling stage, when labels and sleeves have to be separated from the tube,” explains Patil.
Numex’s customer, a packaging manufacturer, wanted to explore a ‘direct-to-tube’ workflow that would remove the variability in recycling and eliminate a manufacturing step, for which he had invested in a special 13-color rotary form press. Discussions were held with the manufacturer and the brand owner to identify potential challenges posed by the products themselves and the planned workflow, including achieving the right skin tone colors. Also discussed was the best way of refreshing the overall packaging, ensuring quick set-up and fast changeovers given the high number of SKUs.
“The tubes were of standard PE coextruded construction, which is challenging to print on,” says Patil. “In addition, most jobs were eight colors and each SKU featured different design features – for example, matte coatings to add a premium ‘look and feel,’ spot varnishes, and graphics with demanding gradients that faded almost to zero. All these coatings and varnishes were done using Flexcel NX plates, so we put a lot of work into establishing how best to render, and even improve, colors and textures.”
“Great colors, wonderful imagery”
The hard work paid dividends, with the GFIA judges praising the successful streamlining of the production process and its enhancement of the products’ sustainability, as well as the “excellent print quality, great colors and wonderful imagery.”
Over 60% of Numex’s production — both flexible packaging and labels — now goes on Flexcel NX Plates, he says, and singles out the multiple advanced plate surface patterning features from Miraclon for delivering “optimum ink densities, whatever the substrate. It controls the ink flow like a mini anilox! We can confidently handle fine halftones in jobs using 175-200pli screen rulings, and smooth vignettes are also achievable.”
Nitin further comments positively on the support provided by Miraclon since becoming a Flexcel NX user. “They do a fantastic job of giving us end-to-end support, of both hardware and software, from calibration and workflow optimization to contributing to our gravure-to-flexo discussions with customers, which really helps the industry grow. In addition, imaging, processing and drying times are all faster — the overall production time for a plate is 30-35 minutes less than with other technologies.”
Early engagement with customer projects
believe we can help brands shorten
lead times to market with flexo.”
Looking to the future, Numex has plans to cement its position as a leading flexo focused trade shop, including working more closely with customers in the early stages of projects. “That way, we believe we can help brands shorten lead times even further.” Key to this is keeping abreast of the latest technology, because that will ensure we keep growing, and growth is a must if we’re to have a better tomorrow.”
In line with this strategy is Numex’s investment in the new Flexcel NX Central software developed by Miraclon specifically to support customers in their drive for efficiency, waste reduction and labor savings. Tailored to the Flexcel NX system, the software enables customers to automate plate production while still employing multiple advanced plate surface patterning features.
Patil says, “With Flexcel NX Central, we’re able to execute the plate layout function much faster than doing it manually, which simplifies the ganging of jobs. We have been able to easily save as much as 50% of our time with the automatic plate layout function, as there is no thinking or planning involved – we just add the files into the Central software and it prepares the plate layout automatically.”
