Romaco implements new sustainability strategy

Sustainability enabler

Andreas Detmers head of the Research & Development department at Romaco Pharmatechnik in Karlsruhe

Romaco has appointed a sustainability officer and defined goals for the company’s climate-friendly development. Not only is the manufacturer seeking to enable more sustainable production by its customers, but Romaco is also keen to improve its carbon footprint.

The Romaco Group has a new central corporate objective — Sustainability. To enable climate protection measures to be formulated and implemented at each of its various facilities, the Romaco Board of Management has just appointed Andreas Detmers as its first group sustainability officer. Andreas Detmers is head of the Research & Development department at Romaco Pharmatechnik in Karlsruhe, where he was most recently responsible for the “Climate-neutral machine” project. “We pursue two approaches in implementing our sustainability strategy,” he explains.

“On the one hand, Romaco is developing technologies that enable our customers to produce in a more sustainable way. On the other, we’re seeking to improve our own carbon footprint step by step.” The pharmaceutical machinery manufacturer is guided by the principle “avoidance is better than reduction is better than offsetting” to reduce carbon consumption systematically. Detmers will be supported by sustainability experts at Romaco’s four production sites in Germany and Italy.

Offsetting – climate-neutral blister packaging line from Romaco Noack

In the production process for Romaco’s new Noack Unity 600 blister packaging line, the emphasis is on offsetting. The certified calculation of the carbon footprint and the downstream cartoner involved assessments of around 4,700 different components.

csm LQ Unity 600 Noack Romaco e5067884c0

ForestFinest, a consultancy service provider specialized in climate protection, determined the total energy consumption required to manufacture and assemble the blister packaging line on Romaco’s behalf. All in all, some 48 tons of carbon equivalents are generated during the production of the Noack Unity 600. The greenhouse gas emissions released along the way are offset by sponsoring a non-governmental climate protection project in Panama. Every customer who opts for one of Romaco’s climate-neutral blister packaging lines is sent a certificate to prove it. Romaco has plans to extend the carbon-neutral machine concept to all product lines in the medium term. Several tablet presses from Kilian and various Noack blister packaging lines and Promatic cartoners are already available in a sustainable version today.

Reduction – Push Packs: Romaco Siebler’s new, recyclable strip packaging

With film and foil specialist Huhtamaki as its industry partner, Romaco has come up with the recyclable strip packaging for pharmaceutical solids. More than 90% of the components used to make Push Packs from polyolefin laminate belong to the same material class (PE and PP). The result is a recycling rate of over 70%. This alternative packaging form developed jointly by Romaco and Huhtamaki enables the pharmaceutical industry to reduce residual waste significantly.

Romaco Siebler Push Packs Eco illus

The innovative sealed strips have a push-through function and are manufactured on heat-sealing machines in Romaco Siebler’s HM 1 series. Siebler’s QuickSeal technology ensures safe processing of the particular foil in conformity with the pharmaceutical industry’s cGMP standards. “So far, the market has reacted overwhelmingly positively to the Push Pack technology’s launch,” Detmers confirms. “Several interested customers are currently testing push-through sealed strips as packaging for their products at our PacTech laboratory in Karlsruhe.” Users can choose between standard, barrier, and eco Push Pack versions.

According to Romaco, Push Packs have a much lower material consumption compared to Al/Al blisters. Despite providing identical barrier properties, they are less than half the weight of Al/Al blister packs, which is additionally reflected in the costs: Push Packs are up to 60% cheaper than their Al/Al counterparts. All Push Pack models are made from PVC-free material. Thus, the use of plastic, which has been the subject of public criticism for many years due to its environmental impact, is completely avoided.

Avoidance – Romaco Kilian and Innojet reduce product losses

One of the stated development goals in the design of Romaco Kilian’s tablet presses is minimal product loss. Amongst other things, this is achieved through precision-manufactured die-tables with hardly any radial run-out. Magnetic product scrapers simultaneously reduce product loss during tableting by enabling further processing of the powder. Kilian moreover shortens the run-in times for its tablet presses using start-up dosing control based on the filling, resulting in even lower material consumption.

The careful use of valuable raw materials is likewise a top priority for the fluidized bed systems designers in the Romaco Innojet Ventilus series. Thanks to the Sepajet system, any particles retained by the filter during production are returned continuously to the process. And when it comes to energy consumption, the airflow bed technology developed by Dr h c Herbert Hüttlin is superior to traditional fluidized bed processes. The processing time for hot melt coating applications is consequently up to 85 percent shorter and the carbon footprint of the Ventilus machines markedly improved.

“We’re well aware that we’re only just getting off the ground with our sustainability strategy,” Detmers concludes. “It’s now up to us to consistently realize the objectives we’ve set ourselves and take further action on that basis. I firmly believe that, through a series of small steps, our company can make a lasting contribution to climate and environmental protection.”

In short, the systematic reduction of raw material, energy, and material usage will therefore determine the agenda of the Romaco Group even more in the future – from the development of new technologies through the implementation of internal measures like facility management to the digitalization of services.

Germany-based Romaco is a leading international supplier of processing and packaging equipment specializing in pharmaceutical solids’ engineering technologies. The group provides individual machines and turnkey solutions for manufacturing and packing powders, granulates, pellets, tablets, capsules, syringes, and medical devices. Romaco also serves the food and chemical industries. The Romaco Group has its headquarters in Karlsruhe, Germany, and is part of the Truking Group, a globally operating high-tech enterprise based in Changsha, China. Truking’s core competency is handling and filling pharmaceutical liquids. Romaco has a strong presence in India with sales and service centers at Mumbai and Hyderabad.

Packaging South Asia — resilient, growing and impactful — daily, monthly — always responsive

The multi-channel B2B in print and digital 17-year-old platform matches the industry’s growth trajectory. The Indian, South Asian, Southeast Asian, and Middle East packaging industries are looking beyond the resilience of the past three years. They are resuming capacity expansion and diversification, with high technology and automation in new plants and projects.

As we present our 2024 publishing plan, India’s real GDP growth for the financial year ending 31 March 2024 will exceed 6%. The packaging industry growth will match the GDP growth in volume terms and surpass it by at least 3% in terms of nominal growth allowing for price inflation in energy, raw materials, consumables, and capital equipment.

The capacity for flexible film manufacturing in India increased by 45% over the past four years. With orders in place, we expect another 20% capacity addition in 2024 and 2025. Capacities in monocartons, corrugation, aseptic liquid packaging, and labels are grown similarly. As the consumption story returns over the next six months, we expect demand to return and exceed the growth trajectory of previous years. The numbers are positive for most of the economies in the region – and as shown by our analytics, our platform increasingly reaches and influences these.

For responsible and sustainable packaging, with its attendant regulations and compliances, there is significant headroom to grow in India and the region. Our coverage includes the entire packaging supply chain – from concept to shelf and to waste collection, sorting, and recycling.

We target brand owners, product managers, raw material suppliers, packaging designers and converters, and recyclers. This is a large and complex canvas – the only thing that can work is your agile thinking and innovation together with our continuous learning and persistence.

The coming year looks to be an up year in this region, and this is the right time to plan your participation and marketing communication – in our rich and highly targeted business platform with human resources on the ground. Share your thoughts and plans and to inspire and mobilize our editorial and advertising teams!

For editorial — for advertisement and for subscriptions

– Naresh Khanna (25 October 2023)

Subscribe Now
unnamed 1


Subscribe to our Newsletter


Please enter your comment!
Please enter your name here