Mitsubishi HiTec Paper launches barricote

The company to reduce pollution through single-use plastic

Mitsubishi HiTec Paper launches barricote
Barricote products being used as wrapping paper for food

Mitsubishi HiTec Paper produces recyclable barrier papers with water-based coatings for food and non-food packaging under the brand name barricote. In the EU, the so-called SUPD (Single Use Plastic Directive) has created a great deal of uncertainty for this innovative and sustainable packaging material, on which the company would like to take a position. 

By 3 July 2021, two years after the Single-Use Plastic Directive (EU) 2019/904 came into force in the European Union, the member states had to transpose the directive into national law. Mitsubishi expressly supports the goal of avoiding and reducing littering and pollution through single-use plastic

The intention of the guidelines published at the end of May 2021 was to clarify the interpretation of the terms used in the directive. Unfortunately, the opposite is the case because the conceptual definitions in the guidelines have created a great deal of uncertainty in paper production and processing.

In particular, this concerns the statements about what is to be understood by a ‘main structural component’ and by a ‘plastic coating.’ The regulation and guidelines underline that paper can function as a sustainable alternative to single-use plastic items. 

At the same time, however, it is stated: “If, however, a plastic coating is applied to the surface of a material made of paper or cardboard or another material to offer protection against water or grease, the end product is considered to be a composite article within the scope of the directive.” 

In this context, the company expressly points out that applying aqueous dispersions to the paper surface to produce a barricote barrier paper cannot be equated with a ‘plastic coating’ as so-called in the guidelines. No separate plastic layer is produced, but instead, the natural and synthetic materials selectively protect the underlying paper against external influences without creating a structure-giving or separable plastic layer. 

These contradicting and ambiguous definitions of terms lead to great uncertainty in future product design. In the packaging sector, this inhibits the development innovative biogenic and paper-based materials that are developed to achieve the best possible recyclability and biodegradability.  

Mitsubishi, therefore, supports the demands of the PTS (Papiertechnische Stiftung) and the Die Papierindustrie V association to the legislative bodies to create clarity in the interpretation of the directive and laws in the interests of the companies subject to them and to expressly exclude papers with water-based dispersion coatings from the scope of the directive. 

Further explanations of Mitsubishi HiTec Paper point of view 

For over six years, Mitsubishi has been making a valuable contribution to the actual goal of SUPD with innovative barricote barrier papers, namely the reduction of pollution and littering of the environment with single-use plastics. Because their barrier papers are fully recyclable in the waste paper cycle, confirmed by PTS and cyclos-HTP, and replace classic plastic products.

Today ensuring full protection of packaged goods is still not possible without polymer-containing barrier products. But the proportion of plastic can already be significantly reduced, and the product can thus be produced in a recyclable manner. Mitsubishi HiTec Paper is intensively researching on completely plastic-free solutions and expects the first results within the next few years. 

The company also believes that using bio-based and biodegradable plastics in combination with paper as a carrier material should continue to be an important component of alternative barrier products. Many of the substances used are approved in everyday products and food and have been shown to pose no health risk. 

Aqueous dispersions themselves are not dimensionally stable without a carrier material. They do not represent a separable and stand-alone component and, therefore, in the company’s opinion, do not fall under the SUPD. Coatings made from aqueous plastic dispersions are to be regarded as paints, varnishes, and adhesives (bonding agents, adhesion promoters, etc.). They do not form an independent structural element that can stand alone but are only stable in connection with a carrier material as the actual component. 

The Covid-19 pandemic led to the country-wide lockdown on 25 March 2020. It will be two years tomorrow as I write this. What have we learned in this time? Maybe the meaning of resilience since small companies like us have had to rely on our resources and the forbearance of our employees as we have struggled to produce our trade platforms.

The print and packaging industries have been fortunate, although the commercial printing industry is still to recover. We have learned more about the digital transformation that affects commercial printing and packaging. Ultimately digital will help print grow in a country where we are still far behind in our paper and print consumption and where digital is a leapfrog technology that will only increase the demand for print in the foreseeable future.

Web analytics show that we now have readership in North America and Europe amongst the 90 countries where our five platforms reach. Our traffic which more than doubled in 2020, has at times gone up by another 50% in 2021. And advertising which had fallen to pieces in 2020 and 2021, has started its return since January 2022.

As the economy approaches real growth with unevenness and shortages a given, we are looking forward to the PrintPack India exhibition in Greater Noida. We are again appointed to produce the Show Daily on all five days of the show from 26 to 30 May 2022.

It is the right time to support our high-impact reporting and authoritative and technical information with some of the best correspondents in the industry. Readers can power Packaging South Asia’s balanced industry journalism and help sustain us by subscribing.

– Naresh Khanna

Subscribe Now


Please enter your comment!
Please enter your name here